If you are a Pod system lover, then you have to look here, the new Aspire Spryte Pod kit might be the best on the market today, the kit is an All-In-One system where battery and tank is in one unit.
Built in battery on 650mAh.
The Pod/tank with the capacity of approx. 2ml e-juice.
Uses Aspire Spryte BVC coils.
Size: 26mm x 26mm x 108mm.
Aspire have again made a fantastic product as they always do, the Spryte is a perfect pocket box that will deliver a fantastic MTL vape.
650 mAh internal battery (charged via Micro-USB).
5 click On/Off on the Fire button.
The Pod/tank will hold approx. 2ml e-juice.
Easy to fill.
Juice window lets you keep an eye on the juice level.
The tank is made from plastic.
Uses Aspire BVC coils.
Adjustable Air flow.
LED indicators show battery level:
Blue - Orange: Over 3.8V.
Blue: Between 3.8 - 3.5V
Orange: Below 3.5V (Charging needed).
Size: 26mm x 26mm x 108mm.
The Aspire Spryte POD Kit has a fantastic ergonomic design, it is a perfect pocket size, the Fire button on the side is well placed and by pressing it 5 times you can turn Spryte On/Off.
Inside the box you get a 650mAh battery. Spryte have a constant 12Watt output that will ensure you get the perfect vape from start to the end of the battery.
Spryte has a built-in LED, indicating the status of your battery:
Blue - Orange: Over 3.8V. Blue: Between 3.8 - 3.5V Orange: Below 3.5V (Charging needed).
Spryte is easily charged through the Micro-USB port.
Basically: If you want a compact, easy-to-use and nice to handle starter kit, the Aspire Spryte POD Kit is an option you do not want to miss!
Spryte use a Pod system, the included Pod have the capacity of approx. 2ml liquid and is filled from the bottom, the easy way to remove the pod is to place your thumb just above the fire button and press up on the tank.
To fill the Pod with liquid, you need to remove the Pod from the Spryte box, at the bottom of the Pod just beside the coil base is the fill hole which have a diameter of approx. 2.8mm.
When the Pod is filled, just place the Pod back and press down on it, when you hear a little click it is placed as it should.
Be aware that the tank is made of plastic, so some liquids may damage the tank. (Menthol, Cola, Anis etc.)
Coil and AFC:
With the Spryte kit you will receive 2 BVC coils, one on 1.8 Ohm and one 1.2Ohm (with green O-rings) the 1.2Ohm is optimized for Nicotine Salt, but the coil will work perfect with regular nicotine liquid as all other BVC coils, both coils are with NiCr wire and have 100% organic cotton to ensure perfect juice flow.
When you need to change the coil, you once again need to remove the Pod, then you need to unscrew the metal part at the bottom of the Pod, that is the coil base, where the coil is to be mounted.
Aspire have made this coil base child proof, so remember to press down when turning, and the same when mounting it again.
This coil base is also the AFC; you can easily adjust the air intake to suite your needs.
You should always drip a bit of e-liquid on the cotton in the coil and leave it to rest for 10-15 minutes with the Pod/Tank full, before first use of a new coil.
That way you can avoid dry-hits and dry-burning the cotton.